The Clean Exterior Blog

How to Get Oil Stains Out of a Concrete Driveway

Every Des Moines driveway has one: the dark spot where the car sits, the drips by the garage door, the rainbow sheen after rain. Oil stains are the question we get most, so here is exactly how they come out — and why the usual advice fails.

Why pressure alone makes it worse

Oil does not sit on concrete; it soaks into the pores. Blasting a stain with raw pressure does two bad things: it drives some of the oil deeper, and it etches a clean-looking stripe into the surrounding concrete that shows the stain's outline forever. The stain is a chemistry problem, and it gets a chemistry answer.

How a professional gets oil out

  1. Degreaser pre-treatment. A concrete degreaser is applied to the stain and left to dwell — it breaks the oil's bond with the concrete and draws it toward the surface.
  2. Agitation and dwell time. Bad stains get brushed and a second application. This is the step DIY attempts skip, and it is the step that does the work.
  3. Hot, even extraction. A surface cleaner passes over the whole driveway at an even distance, lifting the loosened oil out with the wash water — no stripes, no etching.
  4. Honest second look. Fresh stains usually vanish completely. Old stains that have sat for years lighten dramatically; some need a second treatment after drying to fully disappear, and we will tell you which kind yours is before we start.

What about the home remedies?

Cat litter absorbs a fresh spill — good first aid in the first hour, useless on a set stain. Dish soap and a stiff brush can lift a small fresh drip. Baking soda pastes and cola are folklore with a lot of scrubbing attached. And muriatic acid? It etches concrete and can make the spot permanent. If the stain matters — you are selling the house, or you are tired of looking at it — it is a straightforward job for a crew with the right method behind it: see driveway cleaning.

Preventing the next one

Fix the drip if you can, park the leaker on a mat until you do, and consider sealing after cleaning — oil on sealed concrete stays on the surface, where a hose and soap can actually reach it.

Ready to see your place look new again?

Send us a couple of photos and we'll text you a firm quote — no pressure, no obligation, no pushy sales visit.

Get My Free Quote
Talk to Us HereFree Quote