Green algae on the north side. Black streaks under the gutters. Siding that looks tired no matter what you do. A soft wash brings back the color your house actually is — without a single mark of damage.
Get My Free Quote 📞 (515) 800-7243House washing in Des Moines should never mean a high-pressure wand against your siding. Vinyl cracks and gets water forced behind it. Fiber cement loses its paint. Stucco pits. That is why every house we wash is soft washed: we apply professional cleaning detergents at garden-hose pressure, let the chemistry kill the algae, mold, and mildew at the root, then rinse everything clean at low pressure.
The difference is not subtle. Pressure alone blasts the surface green off and leaves the roots alive — it comes back in months, and each blast risks real damage. Soft washing kills the growth, so your house stays clean one to two years, and your siding warranty stays intact. It is also how we clean the places a wand should never touch: window seals, soffits, and painted surfaces.
Iowa humidity plus shaded north and east walls equals algae. It starts as a faint green tint, spreads down from the gutters, and feeds on the limestone filler in vinyl siding — meaning it is not just sitting on your house, it is slowly degrading the surface. Catching it early with a soft wash is cheaper than repainting or re-siding, and it is the first thing buyers and appraisers notice either way.
Full soft wash, all siding, soffits, and fascia.
Full soft wash including second-story walls and gables.
The full curb-appeal reset in a single visit.
You should wash your house — but with soft washing, not raw power. High pressure damages siding, forces water behind panels where it feeds mold, and voids many siding warranties. A soft wash (low pressure plus detergents) cleans deeper, lasts longer, and is completely safe for vinyl, fiber cement, brick, and stucco.
With the right method, yes. The safe method is low pressure: professional detergents do the work, water just rinses. What is NOT safe is a consumer pressure washer on siding — even 1,800 PSI at close range can crack vinyl and strip paint. Our house washes never exceed garden-hose pressure at the wall.
Skip it when temperatures are near freezing, during high winds (detergent drift), and right before painting or staining — fresh paint needs the surface washed a few days ahead, not the same morning. Also wait if you have open damage or missing siding pieces; water belongs outside the wall, and we will point out any spot that should be repaired first.
Do not use high pressure on siding or roofs. Do not spray upward under siding laps. Do not blast window seals, screens, or outdoor outlets. Do not use bleach straight from the bottle — wrong concentrations kill landscaping and still leave algae roots. And do not skip rinsing plants before and after; we protect landscaping on every job.
A professional soft wash of a typical 2,000 square foot home takes about 1.5 to 2.5 hours, including setup, plant protection, and the final walk-around. Two-story homes and heavy algae growth run a little longer. You do not need to be home for most of it — we text before-and-after photos.
Send a photo of the worst side of the house. We will text back a firm soft-wash quote.
Get My Free Quote 📞 (515) 800-7243